Tricity Bendix TBG640WH Manual do Utilizador descarregar pdf (Página 11)

Electrical Connections

THIS HOB MUST BE EARTHED.

Any electrical work required to install this hob should

be carried out by a qualified electrician or competent

person, in accordance with the current regulations.

Electrical Requirements

Any permanent electrical installation must comply with

the latest I.E.E. Regulations and local Electricity Board

regulations. For your own safety this should be undertaken

by a qualified electrician, e.g. your local Electricity Board,

or a contractor who is on the roll of the National Inspection

Council for Electrical Installation Contracting (NICEIC).

Electrical Connections

This hob is designed to be connected to a 230 V 50 Hz AC

electrical supply.

Before switching on, make sure the electricity supply

voltage is the same as that indicated on the hob rating plate.

The rating plate is located on the bottom of the hob. A copy

is attached on the back cover of this book.

The hob is supplied with a 3 core flexible supply cable.

This has to be provided with a proper plug, able to support

the load marked on the identification plate. To connect the

plug to the cable, follow the recommendation given in

diagram aside. The plug has to be fitted in a proper socket.

In the event of having to change the fuse, a 3amp ASTA

approved (BS 1362) fuse must be used.

Should the plug need to be replaced for any reason, the

wires in the mains lead are coloured in accordance with

the following code:

Green and Yellow - Earth

Blue - Neutral

Brown - Live

— Connect the green and yellow (earth) wire to the

terminal in the plug which is marked with the

letter 'E' or the earth symbol or coloured green

and yellow.

— Connect the blue (neutral) wire to the terminal in

the plug which is marked with the letter 'N' or

coloured black.

— Connect the brown (live) wire to the terminal in

the plug which is marked with the letter 'L' or

coloured red.

Permanent Connection

In the case of a permanent connection, it is necessary

that you install a double pole switch between the hob

and the electricity supply (mains), with a minimum gap

of 3 mm between the switch contacts and of a type

suitable for the required load in compliance with the

current electric regulations.

The switch must not break the yellow and green earth

cable at any point.

Ensure that the hob supply cable does not

come into contact with surfaces with

temperatures higher than 50 deg. C.



Min. size Cable/flexMin. size Cable/flex

Min. size Cable/flex

Cable / flex typeCable / flex type

Cable / flex type

FuseFuse

Fuse

0.75 mm

H05 V2V2-F (T90) 3 A

Supply cable replacement

The cable used to connect the hob to the electrical supply

must comply to the specifications given below.

NeutralNeutral

Neutral

Earth (yellow/green)Earth (yellow/green)

Earth (yellow/green)

The manufacturer declines any liability should these

safety measures not be observed.

Upon completion there must be no cut, or stray strands

of wire present and the cable clamp must be secure

over the outer sheath.

A cut off plug inserted into a 13 amp socket is

a serious safety (shock) hazard. Ensure that

the cut off plug is disposed of safely.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

Tricity Bendix TBG640WH Manual do Utilizador Página 11

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Tricity Bendix TBG640WH